Simple house project - 101182

General details

3 bedrooms

3 bathrooms

2 garages

Year Built

2023

280,6 m²

Lot Size

25,96 x 30,16 m

Technical data

The net area of the house without loggias, terraces and the cellar	280,6 m²
Garage area	34,6 m²
Boiler area	6,2m2
Construction footprint	280,6 m²
The angle of inclination	3%
The total built area	280,6 m²
Total area	225,3 m²
Volume	685,58 m³
The height of the house	5,15 m
Roof surface	206,5 m²

Size

Minimum plot sizes

25,96 x 30,16 m

* In the event that the neighbor of the lot offers a notarized receipt regarding the location at a distance of less than 3m from the red lines of the land, then the values of the minimum dimensions of the land can be restricted

House project composition:

Simple house project – 101182, contains all the components necessary to obtain the building permit:

Architectural Solutions-SA
General Plan-PG
Reinforced Concrete Constructions-CBA
Chromatic Solution
3d Imaging
3d exterior design
Complete set of documents required to obtain the urban planning certificate and construction permit:

The simple house project – 101182, contains a very friendly floor plan, with exceptional features and generous surfaces. Canopy for two cars, 3 large bedrooms, 3 bathrooms, an extraordinary living room with work space, storage room and technical area.

Execution options of this simple house Project – 101182:

Simple house project – 101182, as well as the house itself can be executed according to the following constructive schemes:

Stone house (concrete structural elements work together with load-bearing walls). Usually, this type of house is made either of small blocks of limestone M25 or brick Brickstone 300/380, Poroterm 300/380 load-bearing/robust
Frame house. (the concrete structure elements work individually, without support on the load-bearing wall)

This type of structure is built very quickly, and as wall filling material can be used: BCA, light blocks of different nature or hollow non-bearing bricks

The house on the wooden structure. Popularly known as the Canadian frame house, it assumes that the structural walls are made of wood fabric. This type of house is closer to the notion of an ecological house.

Liability and optimization policy:

Any of the construction schemes of this simple house Project – 101182, requires exact compliance with the construction regulations in force.

The house project contains all the necessary technological solutions to ensure the safe exploitation of the future building.

Each stage is verified, calculated and optimized individually in compliance with the technical task presented or submitted by the project beneficiary in such a way that the construction costs are as reasonable as possible.

This stage allows you to optimize expenses for the entire objective not a minimum value of 15% and is an optional service.

The project beneficiary has the obligation to comply exactly with the constructive solutions proposed or the coordination of any changes in volume, planimetry, constructive solutions or of any other nature that occur during the construction works.

If in the process of studying the simple house project – 101182, you have any questions, don’t hesitate to contact us!

A www.proiectari.md specialist will immediately answer all your questions